Maintenance & Service Agreements

We offer a range of maintenance and service agreements to ensure that your system is always working properly. Customers with a maintenance agreement receive two clean and checks per year, reduced labor rates and reduced part replacement rates. Customers with a service agreement receive one clean and check annually with part replacements at no additional charge.

During a clean and check, our technicians will ensure that your system is running efficiently by completing the following steps, as needed:

Service Agreement and Maintenance Agreement Check List

Heat Pumps/ Air Conditioners

  • Check air filters- Clean (if permanent) or replace
  • Check Thermostat operation
  • Inspect coils and clean as needed
  • Clean condensate drain and drain line
  • Measure amp draws on motors and compressor
  • Check run capacitors
  • Check vents for proper air flow
  • Check blower compartment
  • Check refrigerant charge and adjust if needed
  • Check control components for loose or burnt wires
  • Check temperature splits from supply and return
  • Check auxiliary heater for proper operation
  • Wipe down unit

Gas Furnaces

  • Check/Replace air filter
  • Check Heat Exchanger for cracks and holes
  • Check inducer motor
  • Check safeties and limits
  • Check gas pressure at inlet and outlet
  • Check thermostat operation
  • Check amp draws on motors
  • Inspect flue pipes
  • Check ignition system
  • Check/Clean Burners
  • Check/Clean Flame sensor
  • Check temperature splits
  • Clean drain on 90% and higher Efficiency Units
  • Check run capacitors
  • Wipe down unit

Oil Systems

  • Change Oil Nozzle
  • Change Oil Filter
  • Change Oil Strainer
  • Clean ignition system
  • Check pump PSI (pressure)
  • Check/Clean Burner box
  • Check flue and clean if needed
  • Check combustion
  • Check/Replace air filter
  • Wipe down unit

Call us today to receive a specialized agreement that fits your needs and budget!